Toshiba A205-S4777 Maintenance Manual - Page 69
Troubleshooting Procedures, Replacement Procedures
UPC - 032017913844
View all Toshiba A205-S4777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
2 Troubleshooting Procedures The Camera board or system board may be the reason of a Camera fault. Either of these two components may be damaged. To determine if the computer's Camera is functioning properly, perform the following procedures. Figure 2-14 outlines the process. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic test Procedure 2: Connector and replacement check Procedure 1 Diagnostic test Run the functioning Program in windows, which will display the Camera test result. If tests and diagnostics result abnormal go to Procedure 2. If an error is not located, the Camera system is functioning properly. Procedure 2 Connector and replacement check The Camera board or system board may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks. Check 1 Make sure that the Camera board FFC is securely slotted into the system board. If the problem persists, go to Check 2. Check 2 The Camera board may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite A200/A205/Pro A200 Series Maintenance Manual [CONFIDENTIAL] 39