Toshiba DVR610 Service Manual - Page 40

Message Solution Error No. Error Description Priority This disc is protected and not recordable. Release the disc protect setting in the Disc Setting menu. 29 Disc Protected Disc. 7 Disc is full. (No area for new recording) Insert the recordable disc with enough recording space. 30 No available recording space. 5 You cannot record more than 99 titles on one disc. Delete unnecessary titles. (The maximum is 99.) 31 Its recording capacity has been reached. (Video Format Disc) 7 32 Its recording capacity has been reached. (VR Format Disc) 8 You cannot record more than 999 chapters on one disc. (The maximum is 999.) Delete unnecessary chapter markers. 33 The 999 chapter has been reached. (VR Format Disc) 9 You cannot record on this disc as Control Information is full. Delete unnecessary titles. 34 There is not space to record field of control information. 10 You cannot record on the disc as Power Calibration Area is Insert a new disc. 35 PCA is Full. (in REC start) 4 full. This disc is already finalized. Release the finalizing for this disc. 36 It is finalized. (Video Format Disc) 6 37 Access to Memory Area range outside. - Can not record on this disc. Repeat the same operation. 38 Sector Address is wrong. - 39 BUP writing error of chapter editing. - You cannot record more than 49 titles on one disc.(The Delete unnecessary titles. maximum is 49.) 43 The 49 titles has been reached. (+VR Format) 9 You cannot record more than 254 chapters on one disc.(The maximum is 254.) Delete unnecessary chapter marks. 44 The 254 chapter has been reached. (+VR Format Disc) 10 This program is not recordable Set "DVD-RW Recording in +VR mode. Format" to "VR mode". 45 During the CGMS picture (possible to record once) input. (+VR Format Disc) 12 The disc has no recording compatibility. (Set "Make Recording Compatible" to "ON" to convert the disk.) Please make the "Make Recording Compatible" setting "ON" when you want to add a postscript. A postscript tried to be added to + VR Format Disc where different Title Menu 46 from this machine when the Make Recording Compatible setting was turned off was recorded. 7 If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording. (Once the screen of the program line is exited, the program line for the error will be cleared.) (No Error Message is displayed for the error No. 40 ~ 42.) Error Number Timer Programming MON JAN/01 1:01AM L1/L2 E40 JAN/01 12:00PM 1:00PM L1 JAN/07 7:00PM 9:00PM L2 Message Error message is not displayed. 1 / 1 A program with the error number is grayed out and asterisked on the timer programming list. Solution Error No. Error Description Priority - Set the timer programming correctly. - Some portion has not been recorded because of program overlapping. - Set the timer programming before the start time. 40 - Recording did not start at the start time. - - Insert a recordable videotape with a record tab. - No Videotape is inserted. Videotape ran out during recording. Turn the power on and set the clock correctly then set timer 41 Power failed - programming again. Insert the recordable disc. 42 No disc when recording - 1-11-3 E9KGAFIS