Toshiba MEG-F20 Owners Manual - Page 24
Charging the built-in battery
![]() |
View all Toshiba MEG-F20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting ready Charging the built-in battery When the AC adapter is connected to the gigabeat, charging starts automatically. If you are using the gigabeat for the first time, or when the gigabeat hasn't been used for prolonged period, fully charge the battery before using. One charging method is to connect the AC adapter directly to the gigabeat, another method is to use the USB CRADLE. Note that a USB connection with the PC will also permit charging. Preparation Set the BATTERY switch on the bottom of the main unit to ON. The BATTERY switch is turned OFF to prevent over discharge when using for the first time. / Note -Turn OFF the BATTERY switch when the gigabeat will not be used for a long period of time. Doing so prevents over discharge of the internal battery. -Setting the BATTERY switch to OFF will reset the date and time. Direct Charging from the AC Adapter Connect the AC adapter to the gigabeat in the order A to C shown below. It takes approximately 3 hours to fully charge the gigabeat. Connect to outlet. C A B Downloaded from www.Manualslib.com manuals search engine 24
![](/manual_guide/products/toshiba-megf20-owners-manual-ba677bc/24.png)