Toshiba MEG-F20 Owners Manual - Page 29
Connecting the gigabeat, to Your PC - driver
View all Toshiba MEG-F20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting the gigabeat® to Your PC a Turn on the PC. b Connect the AC adapter to the USB CRADLE, turn on the gigabeat, and then connect the gigabeat to the USB CRADLE. Refer to "Charging the built-in battery" (>p.24). c Use the USB cable to connect the PC and the USB CRADLE. Set the USB/LINE OUT switch of the USB CRADLE to "USB". The PC will automatically detect the USB CRADLE and the driver will be installed automatically. When a connection has been made to the PC for the first time, "Found New Hardware wizard" may be displayed. Should this occur, please insert the supplied CD-ROM into the CD-ROM drive of the PC. The required driver will be installed automatically. Downloaded from www.Manualslib.com manuals search engine 29
29
Connecting the gigabeat
®
to Your PC
a
Turn on the PC.
b
Connect the AC adapter to the USB CRADLE, turn on the
gigabeat, and then connect the gigabeat to the USB CRADLE.
Refer to
“Charging the built-in battery” (
>
p.24)
.
c
Use the USB cable to connect the PC and the USB CRADLE.
Set the USB/LINE OUT switch of the USB CRADLE to “USB”.
The PC will automatically detect the USB CRADLE and the driver will be installed
automatically.
When a connection has been made to the PC for the first time, “Found New
Hardware wizard” may be displayed. Should this occur, please insert the supplied
CD-ROM into the CD-ROM drive of the PC. The required driver will be installed
automatically.
Downloaded from
www.Manualslib.com
manuals search engine