URC URC-WR7 Owners Manual - Page 15
Set-up using the, Learning Method - tips
![]() |
View all URC URC-WR7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Set-up using the Learning Method STEP 1: Line up the WR7 to the remote control you want to "learn" from, head-to-head as shown below. Start with the two remotes' infrared (IR) window touching, or nearly touch. STEP 2: On the WR7, press the Component button that you want to set up and the ENTER [ENT] button at the same time. Hold down both buttons for two seconds until the Component button light turns on. This signals that you are in set up mode. COMPONENT BUTTONS ENTER BUTTON STEP 3: Press any button on the WR7 that you want to teach a command to. For example, if you want to teach the [MUTE] button on the WR7 the TV Mute command from the other remote, first press the [MUTE] button on the WR7. The TV Component button light will blink once indicating that the WR7 is ready to learn the command. STEP 4: Press and hold the appropriate button on the other remote until the component button light on the WR7 blinks twice. This indicates the WR7 has learned the command from your other remote. Didn't work? Tap and release the button on your old remote instead of pressing and holding the button down See other tips on page 16. Page | 14
![](/manual_guide/products/urc-urcwr7-owners-manual-e655570/15.png)