Vtech VS112-17 User Manual - Page 71

of messages and F flash, alternatively, in the message window, and Rec mem NOTES full appears on the handset screen. You • You can press on the handset must delete some messages before to quit the voice guide at any time. recording new ones. • After a power outage, the telephone base prompts you to Your answering system allows you to set set the date and time, and Smart your announcement, to save and delete call blocker. After these settings are messages, activate call screening, to set done or skipped, the telephone number of rings before pick up, and to base then prompts if you want to set access remotely. up the answering system via voice guide. Press MENU/SELECT to start Set answering system through voice the setup. guide This feature is an alternative way for you Set remote access code to do the basic setup of the answering To access your answering system system. You can follow the voice guide remotely from any touch-tone phone, to record your own announcement, you need to enter a two-digit number set the number of rings, and set the (00-99). By default, the remote access message alert tone. code is 19. To change the remote access code: 1. Press MENU/SELECT on the handset in idle mode. 1. Press MENU/SELECT in idle mode. 2. Press p/q to highlight Answering 2. Press p/q to highlight Answering sys, then press MENU/SELECT. sys, then press MENU/SELECT . 3. Press p/q to highlight Voice guide, 3. Press p/q to highlight Ans sys setup, then press MENU/SELECT. You hear then press MENU/SELECT . a voice prompt, "This voice guide will 4. Press p/q to highlight Remote assist you with the basic setup of your code, then press MENU/SELECT . answering system." 5. Use the dialing keys to enter a two- 4. Set up your answering system by digit number. inputting designated numbers, as -OR- instructed in the voice guide. Press p/q to scroll to a desired two-digit number. 6. Press MENU/SELECT to confirm. 71