Vtech VS112-17 User Manual - Page 80

Simulatedfull-duplexhandset Frequently asked and base speakerphones questions The simulated full-duplex speakerphone on your handset and telephone base Below are the questions most frequently allow both ends of asked about the cordless telephone. a call to speak and be heard at the same If you cannot find the answer to your time. Optimal performance is subject to question, visit our U.S. website at external factors www.vtechphones.com or call and individual usage. 1 (800) 595-9511 for customer service. In Canada, go to phones.vtechcanada. com or call 1 (800) 267-7377. My telephone does not work at all. Make sure the telephone base is installed properly, and battery is installed and charged correctly. For optimum daily performance, return the handset to the telephone base after use. Disconnect the telephone line cord from your telephone and connect it to another telephone. If there is no dial tone on that other telephone either, then the telephone line cord may be defective. Try installing a The display new telephone line cord. shows No If changing the telephone line cord line. I cannot does not help, the wall jack (or hear the dial the wiring to this wall jack) may be tone. defective. Contact your telephone service provider. You may be using a new cable or VoIP service, the existing telephone jacks in your home may no longer work. Contact your service provider for solutions. Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone I cannot dial base before producing a dial tone. out. Wait an extra second before dialing. Eliminate any background noise. Mute the handset before dialing, or dial from another room in your home with less background noise. 80