Vtech VS112-17 User Manual - Page 72
Area code settings
![]() |
View all Vtech VS112-17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Turn on or off the message alert tone a call from the caller ID log. If you dial 10 When the message alert tone is set digits to make a local phone call, do not to On, and there is at least one new use this home area code feature. message, the telephone base beeps If you do, you cannot place local calls every 10 seconds. The tone stops when from your caller ID log, as they will have all new messages have been reviewed. only seven digits. By default, the message alert tone is Off. To set the home area code: 1. Press MENU/SELECT in idle mode. 1. Press MENU/SELECT in idle mode. 2. Press p/q to highlight Answering 2. Press p/q to highlight Settings, then sys, then press MENU/SELECT . press MENU/SELECT. 3. Press p/q to highlight Ans sys setup, 3. Press p/q to highlight Home area then press MENU/SELECT . code, then press MENU/SELECT. 4. Press p/q to highlight Msg alert 4. Use the dialing keys to enter a three- tone, then press MENU/SELECT . digit home area code. 5. Press p/q to choose On or Off, then press MENU/SELECT. • Press p/q to move the cursor to the left or right. • Press MUTE/DELETE to erase a NOTE • The message alert tone beeps only if all the following conditions are met. digit. • Press and hold MUTE/DELETE to erase all digits. • Answering system is on. 5. Press MENU/SELECTto confirm. • Message alert tone setting is on. • There are new messages. NOTE • If in the future, your telephone service Area code settings provider requires you to dial ten Set home area code digits to make a local call (area code + telephone number), you need to If you dial seven digits to make a local call delete your home area code. While (no area code required), enter your area the home area code is displaying in code into the telephone as the home Step 4, press and hold MUTE/DELETE. area code. When you receive a call from The home area code is now restored within your home area code, the caller to its default setting of _ _ _(empty). ID log only displays the seven digits of Press MENU/SELECT to save. the telephone number. This feature makes it easy for you to place 72
![](/manual_guide/products/vtech-vs11217-user-manual-2ceb6c2/72.png)