Western Digital WDBLWE0080JCH User Manual - Page 65
Managing the Device Configuration, Checking the Device Status
View all Western Digital WDBLWE0080JCH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
MY BOOK DUO USER MANUAL Managing the Device Configuration The initial/default configuration of your My Book Duo device is as a striped RAID 0 disk array for high-speed/maximum-storage performance. You can reconfigure the device as either: A mirrored RAID 1 disk array for maximum-protection/reduced-storage performance JBOD individual drives that can be accessed independently for enhanced flexibility Checking the Device Status The WD Drive Utilities software provides a status indication of the device configuration and each device drive. 1. Open the WD Drive Utilities software by clicking either: The WD Drive Utilities desktop shortcut icon if you created one when you installed the application Start > All Programs > Western Digital > WD Apps > WD Drive Utilities See Figure 5 on page 10. 2. If you have more than one supported device connected to your computer, click the icon of the one that you want to check. 3. Click RAID Management > RAID Status: 4. The status display shows: Current Configuration as either: - RAID 0 (Striped) - RAID 1 (Mirrored) - JBOD (Individual Drives) RAID Status where: This status indication . . . Cannot Access Data Data Lost Detected Degraded Signifies that . . . The RAID disk array has errors and your data is not accessible. The RAID disk array contains errors and the drives have corrupted data. The RAID disk array is degraded but your data is still accessible. Install a supported WD drive and rebuild the RAID disk array. (Continued) MANAGING AND CUSTOMIZING THE DEVICE - 60