Yamaha CVP-709 CVP-709/705 Owners Manual - Page 102

CVP-709 (Grand piano type) Assembly CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten all screws upon completing assembly of each unit. • To disassemble the unit, reverse the assembly sequence. Have a Phillips-head (+) screwdriver of the appropriate size ready. 1 Lean the main unit against the wall as shown.  Spread a large soft cloth, such as a blanket, as shown to protect the floor and wall surfaces.  Lean the main unit against the wall with the key cover closed and the keyboard side on the bottom. Large soft cloth  Styrofoam pads Remove all parts from the package and make sure you have all of the items. To prevent the key cover from accidentally opening during assembly, press down on the key cover, making sure that the sheets (shown) remain in place.  Protective pads CVP-709 (Grand piano type) Assembly Main unit To prevent damage to the MIC-HPJ unit located at the bottom of main unit, make sure to place main unit on the styrofoam pads. Also, make sure that the pads do not touch the MIC-HPJ. CAUTION Be careful not to pinch your fingers. Legs 6 x 40 mm fixing screws x 12 6 x 20 mm fixing screws x 4 Pedal box Bundled pedal cord inside. The pedals are covered with covers when shipped from the factory. Remove the cover from the damper pedal for optimum use of the GP Responsive Damper Pedal effect. NOTICE Do not place the main unit as shown in the illustration here. Incorrect Incorrect Cord holder Power cord Protective pads x 2 Headphone hanger 4 x 10 mm thin screws x 2 Incorrect 102 CVP-709/CVP-705 Owner's Manual