Yamaha CVP-709 CVP-709/705 Owners Manual - Page 109
CVP-705 Assembly
View all Yamaha CVP-709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
CVP-705 Assembly CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten all screws upon completing assembly of each unit. • To disassemble the unit, reverse the assembly sequence. Have a Phillips-head (+) screwdriver of the appropriate size ready. 1 Attach C to D and E. Untie and straighten out the bundled pedal cord. Do not discard the vinyl tie. You will need the vinyl tie later in step 5. Secure D and E to C using four screws F. F D C E Remove all parts from the package and make sure you have all of the items. A Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. Position the pads so that they will not block the speaker box on the bottom of A. B C Bundled pedal cord inside here. D E 2 Attach B. Align the holes on the upper side of B with the bracket holes on D and E, then attach the upper corners of B to D and E by finger-tightening two screws G. Secure the bottom end of B using four screws H. Securely tighten the screws G on the top of B that were attached in step 2-. E G B D H 3 Mount A. Be sure to place your hands at least 15 cm from either end of the main unit when positioning it. F 6 x 20 mm x 4 G 4 x 12 mm x 2 H 4 x 20 mm x 4 J 6 x 16 mm x 6 K 4 x 10 mm x 2 Power cord Cord holders x 2 Headphone hanger A Align the screw holes. 15 cm or further in CAUTION • Be extra careful not to drop the unit or let your fingers be pinched by the main unit. • Do not hold the main unit in any position other than the position specified here. CVP-705 Assembly CVP-709/CVP-705 Owner's Manual 109