Yamaha CVP-709 CVP-709/705 Owners Manual - Page 96
Connecting a Footswitch/Foot Controller ([AUX PEDAL] jack)
View all Yamaha CVP-709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Set the display content that is to be output via [Menu] → [Utility] → [Speaker/Connectivity]. Lyrics/Text LCD Only the lyrics of the Song or text files (whichever you used last time) are output, regardless of the display that is called up on the instrument. The currently selected display is output. NOTE Transition effects on the instrument's display cannot be output. Connecting a Footswitch/Foot Controller ([AUX PEDAL] jack) The FC4, FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to [AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameters such as volume. Connections - Using Your Instrument with Other Devices - Foot Pedals Footswitch FC4/FC4A Footswitch FC5 Foot Controller FC7 NOTE • Make sure to connect or disconnect the pedal only when the power is off. • Do not press the footswitch/foot pedal while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Example 1: Using a foot controller to control the volume of the performance data played on the keyboard. Connect an FC7 foot controller to the [AUX PEDAL] jack. With the initial factory settings, no special setup is necessary. Example 2: Using a footswitch to control Song Start/Stop. Connect a footswitch (FC4, FC4A or FC5) to the [AUX PEDAL] jack. To assign the function to the connected pedal, select "Song Play/Pause" in the operation display: [Menu] → [Assignable] → [Pedal]. Connecting a Microphone or Guitar ([MIC/LINE IN] jack, [MIC/LINE] switch) To the [MIC/LINE IN] jack (standard 1/4" phone jack), you can connect a microphone, guitar, or other various equipment. For instructions on connecting a microphone, refer to page 82. Note that you need to select "MIC" or "LINE IN" depending on the connected equipment. When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set the [MIC/LINE] switch to "MIC." When the output level of the connected equipment (such as a synthesizer, keyboard, CD player) is high, set the [MIC/LINE] switch to "LINE." 96 CVP-709/CVP-705 Owner's Manual