Yamaha DME32 DME32 Owners Manual - Page 114

108 Chapter 8-Component Guide Part I Delay The DELAY page features individual delays for the low, mid, and high channels. Delay times can be specified in milliseconds or samples, meters, or feet. The Delay parameters for all channels are explained in the following table. Section Parameter Range Description ms LOW, MID, HIGH m1 ON/OFF DELAY SCALE 0.0-500.0 ms See the following table ON/OFF See the following table Sets the delay time in milliseconds (linked to control below) Sets the delay time in the units chosen using the DELAY SCALE buttons (linked to ms control) Turns the delay on and off Selects the delay units for the Sample controls 1. This control's label depends on the Delay Scale setting. In the DELAY SCALE section, "FS" indicates the selected wordclock frequency, and "340 m/s" and "1,115.5 ft/s" are the speed of sound in meters and feet respectively (air temperature = 14˚C, 57.2˚F). The parameter ranges for the Samples, Meters, and Feet settings are as follows: Samples Meters Feet Delay Scale FS = 48 KHz 0-24000 samples 0.0-170.0 meters 0.0-557.8 feet FS = 44.1 kHz 0-22050 samples DME32-Owner's Manual