Yamaha DME32 DME32 Owners Manual - Page 209

204 Chapter 10-Front Panel Operation Using Scene Recall Only Scene Recall Only allows scenes to be recalled but prevents access to other functions. 1 Use the [UTILITY] button to select the "Setup protection level" function, as shown below. The UTILITY indicator lights up. SCENE NO. 0i CONFIGURATION SCENE SetupXprotectionXlevel XXXXXXXXXXXXFullXpro_tect Note that if Full Protect mode is enabled, you won't be able to select the "Setup protection level" function until you disable the protection. To do this, press the [PROTECT] button, enter the correct password, and then press the [RECALL] button. 2 Use the DATA wheel or [INC] and [DEC] buttons to select "Scene recall only," as shown below. SCENE NO. 0i CONFIGURATION SCENE SetupXprotectionXlevel XXXXXXXSceneXrecall_Xonly The PROTECT indicator lights up. 3 Press the [UTILITY] button repeatedly until the UTILITY indicator goes out. In Scene Recall Only mode, scenes can be recalled as normal, but scenes cannot be stored. Components, parameters, and values can be selected and viewed in the normal way, but parameters cannot be edited. Only three utility displays are available in Scene Recall Only mode: the main display, the Setup protection level display, and the SLOT display. If Scene Recall Only mode is enabled and you want to edit component parameters, first switch to Full Protect mode (see page 205), and then temporarily disable the protection (see page 206). DME32-Owner's Manual