Yamaha DME32 DME32 Owners Manual - Page 171

166 Chapter 9-Component Guide Part II Filter There are four components in the Filter group: HPF (high-pass filter), LPF (low-pass filter), BPF (band-pass filter), and NOTCH (notch filter). HPF An HPF (high-pass filter) attenuates signals below the specified frequency while allowing signals above that frequency to pass through unaffected. The HPF component features one input and one output. The HPF control window features INPUT, filter, and OUTPUT sections. The HPF component parameters are explained in the following table. Section Parameter Range Description ON/OFF INPUT Filter LEVEL PHASE FREQ SLOPE OUTPUT LEVEL MUTE ON/OFF -Infinity dB to 0.0 dB NOR/REV 20.0 Hz-20.0 kHz -6 dB/octave, -12 dB/octave -Infinity dB to 0.0 dB ON/OFF Turns the component on and off Adjusts the input signal level Inverts the input signal Adjusts HPF cutoff frequency Selects the filter slope Adjusts the output signal level Mutes the output DME32-Owner's Manual