Yamaha DME32 DME32 Owners Manual - Page 115
Parameter, Range, Description, SLOPE, SLOPE & TYPE, lter slope and type
![]() |
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Crossover Processor 109 Cross The CROSS page features the 3-way crossover controls and crossover graph. Note that the Gc controls (not shown here) appear only when an Adjustable Gc type SLOPE & TYPE filter is selected. The crossover graph at the top of the window displays the crossover settings graphically. A vertical dotted line indicates the crossover frequency of each channel:"L"for low,"M" for mid, and "H" for high. The crossover parameters are explained in the following table. Section Parameter Range Description LOW MID HIGH FREQ HPF SLOPE 20.0 Hz-20.0 kHz 1 FREQ 20.0 Hz-20.0 kHz LPF Gc2 -6 dB to +6 dB SLOPE & TYPE 3 FREQ 20.0 Hz-20.0 kHz HPF Gc2 -6 dB to +6 dB SLOPE & TYPE 3 FREQ 20.0 Hz-20.0 kHz LPF Gc2 -6 dB to +6 dB SLOPE & TYPE 3 FREQ 20.0 Hz-20.0 kHz HPF Gc2 -6 dB to +6 dB SLOPE & TYPE 3 Adjusts the low HPF cutoff frequency Selects the low HPF filter slope Adjusts the low LPF cutoff frequency Adjusts the low LPF gain at the cutoff frequency Selects the low LPF filter slope and type Adjusts the mid HPF cutoff frequency Adjusts the mid HPF gain at the cutoff frequency Selects the mid HPF filter slope and type Adjusts the mid LPF cutoff frequency Adjusts the mid LPF gain at the cutoff frequency Selects the mid LPF filter slope and type Adjusts the high HPF cutoff frequency Adjusts the high HPF gain at the cutoff frequency Selects the high HPF filter slope and type 1. THRU (filter off), 6dB/oct, 12dB/oct, 18dB/oct, 24dB/oct (Butterworth). 2. Gc controls appears only when a Gc SLOPE & TYPE filter is selected. For Butterworth, Bessel, and Linkwitz-Riley, the Gc setting is ignored and the Gc value is fixed as follows: Butterworth and Bessel: -3 dB, Linkwitz-Riley: -6 dB. DME32-Owner's Manual
![](/manual_guide/products/yamaha-dme32-dme32-owners-manual-6cc912d/115.png)