Yamaha DVD-S1800 Owner's Manual - Page 15

English ■ Digital connections If you want to use the Dolby Digital, DTS, or MPEG function on your AV receiver, connect DIGITAL (OPTICAL) or DIGITAL (COAXIAL) jack of this unit to the corresponding input jacks of your AV receiver using a commercially available digital optical or digital coaxial cable. CENTER COAXIAL IN L L AV R R MIXED 2CH FRONT SUBWOOFER SURROUND AUDIO OUT OPTICAL DIGITAL OUT ON OFF RS 232C REMOTE CONTROL HDMI This unit (U.K., Europe, and Russia models) CONNECTIONS Video connections This unit has SCART, composite video, S-video, and component video output jacks. If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector on your receiver. Use the one that corresponds to the input jacks on the component to be connected. This unit (U.K., Europe, and Russia models) AV RS 232C ONTROL HDMI VIDEO PR / CR PB / CB Y S VIDEO COMPONENT VIDEO OUT OPTICAL IN COAXIAL IN AV receiver Speakers Notes • If you make a connection with or , set [Digital Out] to [All] (see "Setting the digital output" on page 31). • If the audio format of the digital output does not match the capabilities of your receiver, the receiver produces a distorted sound or no sound at all. Make sure to select the appropriate audio format from the menu screen on the disc. Pressing AUDIO on the remote control once or more may change not only the audio languages but also the audio format. • SA-CD audio signals are not output from DIGITAL (COAXIAL/OPTICAL) jacks. • If you want to enjoy Dolby Digital, DTS, and MPEG formats, you must connect this unit to an AV receiver that supports these formats. Video pin cable (supplied) VIDEO IN S-VIDEO IN PB/CB PR/CR Y COMPONENT VIDEO IN AV receiver VIDEO OUT VIDEO IN S VIDEO OUT COMPONENT VIDEO OUT S VIDEO IN COMPONENT VIDEO IN TV 11 En