Yamaha DVD-S1800 Owner's Manual - Page 17

English ■ HDMI video output This unit is compatible with the following video formats: 480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50 Hz, 60 Hz, and 1080p/50 Hz, 60 Hz. CONNECTIONS Notes • You need to select one of the HDMI resolution settings by pressing HDMI on the remote control repeatedly or by using the HDMI Video setup menu (see page 36). • Depending on the connected DVI component, black and white in the image may not be distinct. In this case, adjust the picture setting of the connected DVI component. ■ HDMI audio output Audio format Analog output setting Auto*1 HDMI Audio PCM Off Dolby Digital Multi-channel Stereo Dolby Digital PCM multi*2 PCM 2ch Multi-channel DTS DTS DVD-Video Stereo PCM multi*2 PCM 2ch MPEG Multi-channel Stereo MPEG PCM multi*2 PCM 2ch PCM 2ch*4 Multi-channel/Stereo PCM 2ch PCM 2ch DVD-Audio Multi 2ch*4 Multi-channel PCM (PPCM) multi*2,3 PCM (PPCM) multi*2,3 Stereo PCM (PPCM) 2ch*3 PCM (PPCM) 2ch*3 Multi-channel/Stereo PCM (PPCM) 2ch PCM (PPCM) 2ch Off CD/MP3/ WMA/DivX® 2ch Multi-channel/Stereo PCM 2ch PCM 2ch Multi-channel Multi DTS-CD Stereo DTS PCM multi*2 PCM 2ch 2ch Multi-channel/Stereo PCM 2ch VCD 2ch Multi-channel/Stereo PCM 2ch PCM 2ch SVCD Multi Multi-channel Stereo MPEG PCM multi*2 PCM 2ch 2ch Multi-channel/Stereo PCM 2ch SA-CD Multi/2ch Multi-channel/Stereo - - - *1: If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio output is automatically changed from bitstream signals to PCM signals. *2: If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed from PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less. *3: If the audio source is prohibited from downmixing, the front L/R channel audio and 48 kHz/16-bit signals or less are output instead of downmixed stereo. *4: If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/ 16-bit signals or less. Notes • You need to set HDMI Audio (see page 37). • SA-CD signals cannot be output using HDMI. Make an analog connection to listen to SA-CD (see page 10). 13 En