Yamaha DVD-S1800 Owner's Manual - Page 37

English Initialize You can reset [Distance] settings to the initial factory settings. 1 Select [Initialize] under [Distance] in [SPEAKER] menu. 2 Press . ➜ The confirmation screen appears. 3 Select [Yes] to reset the setting, and then press ENTER. ➜ [Distance] settings are reset to the initial factory settings. Setting speaker levels You can set the volume levels for individual speakers. • Select [Level] in [SPEAKER] menu. Front L, Center, Front R, Surround L, Surround R, Subwoofer Set the volume levels for front L/R speakers, center speaker, surround L/R speakers or subwoofer. Control range: 0dB to -12dB Control step: 1dB Test Tone A test tone can be output to help you judge the volume level of each speaker. 1 Select [Test Tone] under [Level] in [SPEAKER] menu. 2 Press / to select [Off], [Manual] or [Auto]. Off Select this to output no test tone. Manual Select this to output the test tone manually. Auto Select this to output the test tone from each speaker automatically. 3 For [Auto], press / to select [Yes], and then press ENTER to output the test tone. For [Manual], press / to select each speaker, and then press ENTER to output the test tone. Notes • The test tone is not output from a center speaker, surround speakers, and a subwoofer when the [Analog Output] setting is set to [Stereo] (see "Setting the analog output" on page 31). • These settings are only effective for analog output. SETUP MENU Initialize You can reset [Level] settings to the initial factory settings. 1 Select [Initialize] under [Level] in [SPEAKER] menu. 2 Press . ➜ The confirmation screen appears. 3 Select [Yes] to reset the setting, and then press ENTER. ➜ [Level] settings are reset to the initial factory settings. Setting the SA-CD configuration You can select speaker sizes and on/off statuses for SA-CD discs. You can also select a cut-off (cross-over) frequency for all low-frequency signals. All frequencies below the selected frequency are sent to the subwoofer. • Select [SA-CD] in [SPEAKER] menu. SA-CD Config Select speaker sizes and on/off statuses from the following three settings. Speaker Front L/R Center Surround L/R Subwoofer Size or on/off Config 1 Config 2 Config 3 Large Small Large Large Small Small Large Small Small On On Off CUT-OFF Frequency Select a cut-off (cross-over) frequency for all lowfrequency signals. All frequencies below the selected frequency are sent to the subwoofer. Control range: 60, 80, 100, 120 (Hz) 33 En