Yamaha DVD-S1800 Owner's Manual - Page 45
Problem, Solution - region
View all Yamaha DVD-S1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English TROUBLESHOOTING Problem Solution No sound or distorted sound No audio at digital output No audio at HDMI output Disc does not play Picture freezes momentarily during playback This unit does not respond to the remote control Buttons do not work This unit does not respond to some operating commands during playback Menu items cannot be selected Cannot play back SA-CD disc No sound during DivX® movies playback Adjust the volume on the TV or the AV receiver. Check that the speakers are connected properly. Adjust the volume level in the setup menu. Check the digital connections. If you are playing a DTS source, check that your receiver can decode DTS and [Digital Out] is set to [All]. If you are playing an MPEG-2 source, check that your receiver can decode MPEG-2. Otherwise, make sure that [Digital Out] is set to [PCM]. Check that the audio format of the selected audio option on the disc matches your receiver capabilities. Make sure that [HDMI Audio] is set to [Auto] or [PCM]. No audio signals via the HDMI jack are output if the DVI-D component is connected to this unit using the HDMI-DVI converter cable. To output audio signals via the HDMI jack, connect an HDMI component to this unit. Check that the disc format is supported. The CD-R/RW, DVD+R/RW and DVD-R/RW must be finalized. Check that the disc label is facing up. Check that the disc is defective by trying another disc. If you have recorded a JPEG, MP3 or WMA disc yourself, check that your disc contains at least ten JPEG picture files or five MP3/WMA music tracks. Check the region code of the DVD disc. Check the disc for fingerprints/scratches and clean it with a soft cloth wiping from the center to the edge. Aim the remote control directly at the remote control sensor on the front panel. Reduce the distance of the remote control from this unit. Replace the batteries in the remote control. Reinsert the batteries with their polarities (+/- signs) as indicated. Disconnect the power cable from the AC outlet for a few minutes. Reconnect the power cable and try to operate again as usual. Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. Depending on the connection status or disc availability, some menu items cannot be selected. When [SA-CD mode] is set to [CD], this unit does not play back SA-CD discs which does not have CD layer. The audio code may not be supported by this unit. See page - - 33 11 31 31 - 37 12 3, 44 - 18 - - 3 4 15 15 15 15 - - - 29 - 41 En