Yamaha EL-500 Owner's Manual - Page 161
System Messages, Send the Registration Data from the EL-700/500 to, the Personal Computer PC
View all Yamaha EL-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
System Messages The System Messages are the data related to the overall system of the device. System Exclusive Messages System Exclusive messages are used to exchange the system and voice/ registration data. These allow you to execute bulk dump operation, sending and receiving all the data of the EL-700/500 including registrations to and from an external device. This is especially useful for you to build up the library of the registration data in a device like a hard disk. Examples of Exchanging the Data Use the following examples to send (or receive) the registration data to (or from) a personal computer (a sequencing software). First, you need to connect your EL-700/500 with a personal computer (a sequencing software) using a Serial Cable or a MIDI cable (page 158). NOTE: You also need a sequencing software, which has been properly installed in the personal computer, and which can send and receive system exclusive messages. Send the Registration Data from the EL-700/500 to the Personal Computer (PC) • Preparation 1 Set the Strings voice on the Upper Keyboard of the EL-700/500. Press STRINGS button for the Upper Keyboard Voice 1 section, and select String 1 from the Strings Menu. 2 Store the registration to the Registration Memory button 1. While holding down the M. button Press the Registration Memory button 1. • Sending the Registration Data 3 Send the Request-to-Send all RAM message, "F0, 43, 70, 70, 10, F7" (Hexadecimal), from the sequencing software (PC) to the EL700/500. Once the EL-700/500 receive the Request-to-Send all RAM message, the EL-700/500 automatically sends all registration data in the all registration numbers to your PC. You can store the registration data in a file on your PC. NOTE: Depending on the capacity of your sequencing software, you may need to divide the data into two and send them to the PC separately. Appendix 14 161