Yamaha EL-500 Owner's Manual - Page 27

2 Press one of the Data Control buttons that corresponds to voice you wish to select. 2 Voice Sections The selected voice will be shown at the upper row of the LCD. In this case, Pop Organ 1 appears. 3 If you wish to, you can select voices from the other Upper Keyboard Voice sections (Upper Voices 2 and Lead Voice), following steps #1 and #2 above. 4 Set the volume for each voice section. There are two volume controls: Coarse and Fine. Coarse: Use the VOLUME controls of each voice section on the panel to set the desired level for each voice. The controls have seven volume settings, from a minimum of 0, or no sound, to a maximum of full volume. STRINGS BRASS UPPER KEYBOARD VOICE 1 CLARINET SAXO- CHORUS HARMO- PHONE NICA 1 BRILLIANCE VOLUME BRILLIANT MAX ORGAN PIANO GUITAR VIBRAPHONE COSMIC TUTTI EL-700 2 MELLOW MIN Fine: Pressing the same panel voice button again (or the same Data Control button corresponding to the selected voice) calls up the Voice Condition display. Use the Data Control buttons to the far right side to change the level of the desired voice. The relative level is indicated by the bar under each voice in the display as well as by a numeric value (from 0-24). NOTE: Pressing a voice button once calls up that voice's Voice Menu display. Pressing it a second time calls up the Voice Condition display. Successive presses alternate between the two displays. 27