Yamaha EL-500 Owner's Manual - Page 86
Formatting a Disk
View all Yamaha EL-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Music Disk Recorder 7 2 Formatting a Disk Before recording a performance to your blank disk, the disk must first be formatted. To format a disk: 1 Put the disk, label facing up, into the disk drive (floppy disk slot). "Fort" will appear on the LED display indicating that the inserted disk requires to be formatted. UPPER RECORD LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT FROM TO SONG COPY SONG DEL. PAUSE STOP PLAY SONG SELECT RECORD MUSIC DISK RECORDER - TEMPO + FORMAT CUSTOM PLAY 2 While holding down the SHIFT button, press the FORMAT button. This step puts the format operation on stand-by, indicated by the dashes on the LED display and the flashing LED above the FORMAT button. 3 Press the FORMAT button again to begin formatting. The LED above the FORMAT button stays lit. The number "160" appears on the LED display and counts down to "001" as the disk is being formatted. When formatting is completed, operation returns to the original STOP status. The following Song Name display appears after the operation. UPPER RECORD LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT PAUSE FROM TO SONG COPY STOP PLAY ---- SONG SELECT SONG DEL. RECORD CUSTOM PLAY MUSIC DISK RECORDER - TEMPO + FORMAT UPPER RECORD LOWER PEDAL CONTROL UPPER PLAY LOWER PEDAL CONTROL SHIFT SONG REPEAT PAUSE FROM TO SONG COPY STOP PLAY 160 SONG SELECT SONG DEL. RECORD CUSTOM PLAY MUSIC DISK RECORDER - TEMPO + FORMAT NOTE: Selecting UTIL./Change Name allows you to change the song name you have recorded. See page 89 for the details. The song numbers to be displayed at one time are 10. The page numbers, from 1 through 4, are also shown at the top right side of the display. A total of 40 song locations are created. The song names next to each song number are left blank and indicate that each song number doesn't contain any data. If you format a disk that contains previously recorded data, all data on the disk will be erased. To avoid inadvertently formatting a disk before this step, press the STOP button. About SHIFT button: You will find the SHIFT button (printed in green) at the top right side of the M.D.R. section. Some buttons in the M.D.R. section have dual functions: the first function is printed in white above each button; the second function is printed in green below each button. The SHIFT button is used to select the second functions by pressing each function button while holding down the SHIFT. 86