Yamaha MG166CX-USB Owner's Manual - Page 6

Introduction Before Turning on the Mixer 1 Be sure that the mixer's power switch is in the STANDBY position. CAUTION Use only the included power adaptor (PA-30) or an equivalent recommended by Yamaha. Use of a different adaptor may result in equipment damage, overheating, or fire. 2 Connect the power adaptor to the AC ADAPTOR IN connector (q) on the rear of the mixer, and then turn the fastening ring clockwise (w) to secure the connection. w q 3 Plug the power adaptor into a standard household power outlet. • Be sure to unplug the adaptor from the outlet when not using the mixer, or when there are CAUTION lightning storms in the area. • To avoid generating unwanted noise, make sure there is 50 cm or more between the power adaptor and the mixer. Turning the Power On/OFF Press the mixer's power switch to the ON position. When you are ready to turn the power off, press the power switch to the STANDBY position. CAUTION Note that trace current continues to flow while the switch is in the STANDBY position. If you do not plan to use the mixer again for a long while, please be sure to unplug the adaptor from the wall outlet. Computer System Requirements Windows Vista Computer Windows-based computer with built-in USB interface OS Windows Vista CPU 1 GHz or higher Intel Core/Pentium/Celeron processor Memory 1 GB or more Windows XP Computer Windows-based computer with built-in USB interface OS Windows XP Professional/XP Home Edition CPU 750 MHz or higher Intel Core/Pentium/Celeron processor Memory 96 MB or more (128 MB or more recommended) Macintosh Computer Macintosh computer with built-in USB interface OS MacOS X 10.3.3 or higher CPU Macintosh G3 300 MHz or higher/Intel processor Memory 128 MB or more Cubase AI 4 System Requirements Windows OS Windows XP Professional/XP Home Edition CPU 1.4 GHz or higher Intel Pentium processor Memory 512 MB or more Audio Interface Windows DirectX compatible Hard Disk 400 MB or more Macintosh OS MacOS X 10.4 or higher CPU Power Mac G4 1 GHz/Core Solo 1.5 GHz or higher Memory 512 MB or more Hard Disk 400 MB or more NOTE • A DVD driver is required for installation. • To activate your software license, install the application while the computer is connected to the internet. 6 MG206C-USB/MG166CX-USB/MG166C-USB Owner's Manual