Yamaha MGP32X Owner's Manual - Page 16
Display Meter Knob 1
View all Yamaha MGP32X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Controls and Connectors Display section This section is for setting and operating the display. Refer to pages 24-25 for details. Meter section Knob 1 Knob 2 q Display Indicates the various messages and settings related to the currently selected operation or function. w Knob 1, Knob 2 Selects/sets the functions and parameters appearing on the display. Rotate Knob 1 to operate the functions on the lower left side of the display, and Knob 2 for the functions on the lower right side of the display. e HOME button Calls up the display to view the status of the functions. This button does not determine or change the parameter. r FX1 and FX2 buttons Call up the display to switch the programs of FX1 (effect1) and FX2 (effect2) and to adjust their parameters. t GEQ button Calls up the display to set the Graphic equalizer (GEQ). y COMP button Calls up the display to set the compressor. u USB button Calls up the display to record and play back with the USB device. i SETUP button Calls up the display to adjust the contrast of the display, and to set the ducker and the leveler. Use these meters to view various signal levels: the levels to the STEREO OUT L/R jacks, the PFL and AFL levels, and the levels to the GROUP OUT 1-4 jacks. The PFL or AFL signals indicated by these meters can be monitored through the MONITOR OUT jacks and the PHONES jack. q METER SELECT button and indicator Switches the display of the level meter to the output signal level of the STEREO OUT L/R and the PHONES jacks, or of the GROUP OUT 1-4 jacks. The indicators for the selected signals come on. w STEREO level meter Shows the signal level output to the STEREO OUT L/R jacks or the GROUP OUT 1 and 2 jacks, respectively. The "0" position corresponds to the standard level. The PEAK indicator lights red when the level hits the clipping point. e PFL/AFL level meter Shows the signal level output to the PHONES jack or the GROUP OUT 3 and 4 jacks, respectively. The "0" position corresponds to the standard level. The PEAK indicator lights red when the level hits the clipping point. NOTE The PFL signal has display priority over the AFL signal when an input channel's PFL switch is on. 16 MGP32X/MGP24X Owner's Manual