Yamaha RX-V1000 Owner's Manual - Page 18

CONNECTIONS Connecting Video Components s About the video jacks There are three types of video jacks. Video signals input through the VIDEO jacks are the conventional composite video signals. Video signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals. The S-video signals achieve high-quality color reproduction. Video signals input through the COMPONENT VIDEO jacks are separated into luminance (Y) and color difference (PB/CB, PR/CR) video signals. The jacks are also separated into three for each signal. The description of the component video jacks may be different depending on the component (e.g. Y, CB, CR/Y, PB, PR/Y, B-Y, R-Y etc.). Component video signals provide the best quality in picture reproduction. If your video component has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output jack on your video component to the S VIDEO jack or connect the component signal output jacks on your video component to the COMPONENT VIDEO jacks. Y VIDEO jack PB/ (composite) CB S VIDEO jack PR/ CR COMPONENT VIDEO jacks y • Each type of video jack works independently. Signals input through the composite video, S-video and component jacks are output through the corresponding composite video, S-video, and component jacks, respectively. • If you make S-video connections to this unit, it is not necessary to make composite video connections. If both types of connections are made, this unit gives priority to the S-video signal. • You can designate the input for the COMPONENT VIDEO A and B jacks according to your component by using "7 I/O ASSIGNMENT" on the SET MENU (see page 41 for details). Notes • Use a commercially available S-video cable when connecting to the S VIDEO jack, and commercially available video cables when connecting to the COMPONENT VIDEO jacks. • When you are using the COMPONENT VIDEO jacks, check the details in the owner's manual that came with the component being connected. s VIDEO AUX jacks (on the front panel) S VIDEO VIDEO L AUDIO R OPTICAL VIDEO AUX S V L R O These jacks are used to connect any video input source such as a game console to this unit. OPTICAL OUT AUDIO OUT R AUDIO OUT L VIDEO OUT S VIDEO OUT Game console s About the q RF (AC-3) signal input jack (China and general models only) If your LD player has a Dolby Digital RF (AC-3) signal output jack, connect it to the q RF (AC-3) input jack on this unit. If the Dolby Digital RF (AC-3) and analog signals are input at the same time, priority is given to the RF signals. When you want to reproduce the Dolby Digital RF (AC-3) signals, set the input mode to D.D. RF by using INPUT MODE (see page 26). LD RF (AC-3) COAXIAL: SELECT BY SETMENU Notes • The Dolby Digital RF (AC-3) signals cannot be output by using the REC OUT selector. When you record sound or images from an LD player, be sure to connect the player to either the DIGITAL OPTICAL or analog audio jacks. • Even if you connect an LD player with the Dolby Digital RF (AC-3) output jack to this unit, you cannot reproduce Dolby Digital sound from all LD discs. You must playback an LD encoded with Dolby Digital signals in order to take advantage of the Dolby Digital sound. 14