Yamaha RX-V1000 Owner's Manual - Page 33
Normal Stereo Reproduction, Virtual CINEMA DSP and SILENT, CINEMA DSP
View all Yamaha RX-V1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
INTRODUCTION s Virtual CINEMA DSP and SILENT CINEMA DSP You can experience the virtual CINEMA DSP sound field by setting "1C REAR L/R SP" on the SET MENU to NONE. The sound field processing is changed to the Virtual CINEMA DSP mode according to the selected DSP program. Virtual CINEMA DSP is performed by using the main speakers. You can also listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Note • This unit is not set in the virtual CINEMA DSP mode even if "1C REAR L/R SP" is set to NONE in the following cases: - when the 6ch Stereo, DOLBY DIGITAL/Normal or DTS/ Normal program is selected; - when the sound effect is turned off; - when 6CH INPUT is selected as the input source; - when 96-kHz sampling digital signals are input to this unit; - when the Dolby Digital KARAOKE source is played; - when using the test tone; or - when connecting the headphones. BASIC PLAYBACK Normal Stereo Reproduction Press EFFECT to turn off the sound effect for normal stereo reproduction. Press EFFECT again to turn the sound effect back on. EFFECT EFFECT or Front panel Remote control Notes • If you turn off the sound effect, no sound is output from the center, rear and rear center speakers. • If you turn off the sound effect while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center, rear and rear center channels are mixed and output from the main speakers. • The volume may be greatly reduced when you turn off the sound effect or if you set "10B D-RANGE" on the SET MENU to MIN. In this case turn on the sound effect. PREPARATION BASIC OPERATION ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 29