Yamaha RX-V1000 Owner's Manual - Page 30

BASIC PLAYBACK s BGV (background video) function The BGV function allows you to combine a video image from a video source with a sound from an audio source. (For example, you can listen to classical music while you are watching a video.) Select a source from the video group and then select a source from the audio group with the input selector buttons on the remote control. The BGV function does not work if you select the sources with INPUT l / h on the front panel. PHONO V-AUX TUNER MD/TAPE CD-R CD D-TV/LD CBL/SAT VCR 1 VCR 2/DVR DVD Remote control Input Modes and Indications This unit comes with various input jacks. If your component is connected to more than one type of input jack, you can set the priority of the input signal. When you turn on the power of this unit, the input mode is set according to "8 INPUT MODE" on the SET MENU (see page 42 for details). Press INPUT MODE (or the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the front panel display and on the video monitor. PHONO INPUT MODE or V-AUX TUNER MD/TAPE CD-R CD D-TV/LD CBL/SAT VCR 1 VCR 2/DVR DVD Front panel Remote control AUTO: In this mode, the input signal is automatically selected in the following order: 1) Dolby Digital or DTS signal 2) Digital (PCM) signal 3) Analog signal DTS: In this mode, only the digital input signal encoded with DTS is selected even if another signal is input at the same time. ANALOG: In this mode, only the analog input signal is selected even if a digital signal is input at the same time. When LD is selected as the input source (China and general models only) AUTO: In this mode, this unit automatically selects the signal in the following order: 1) Dolby Digital RF signal 2) DTS signal 3) Digital (PCM) signal 4) Analog signal D.D. RF: This unit only selects the Dolby Digital RF signal. DTS: This unit only selects the DTS signal. DGTL: This unit only selects digital (PCM) signal input through the OPTICAL jacks. ANALOG: In this mode, only the analog input signal is selected even if a digital signal is input at the same time. Notes • If digital signals are input from both the COAXIAL and OPTICAL jacks, the digital signal from the COAXIAL jack is selected. • When AUTO is selected, this unit automatically determines the type of signal. If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate setting and reproduces 5.1 channel source. • The sound output may be interrupted for some LD and DVD players in the following situation: The input mode is set to AUTO. A search is performed while playing the disc encoded with Dolby Digital or DTS, and then disc playing is restored. The sound output is interrupted for a moment because the digital signal was selected again. VIRTUAL DIGITAL PRO LOGIC DSP 6.1/ES SP PCM AB DTS MOVIE THEATER 1 2 PS PTY RT CT PTY HOLD EON STEREO AUTO DOLBY DIGITAL NEWS INFO AFFAIRS SPORT ZONE 2 PRO LOGIC ENTERTAINMENT MEMORY TUNED SLEEP VOLUME dB ms D-TV/LD CBL/SAT VCR 1 VCR2/DVR V-AUX DVD MD/TAPE CD-R TUNER CD PHONO Input mode 26