Yamaha RX V2700 MCXSP10 Manual - Page 118
Sur.Initialize Surround initialize, Audio Select, Default Audio input jack select
UPC - 027108927077
View all Yamaha RX V2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
GRAPHIC USER INTERFACE (GUI) SCREEN Zone2 Initial Vol./Zone3 Initial Vol. (Zone 2/Zone 3 Initial volume) Use this feature to set the volume level of Zone 2 or Zone 3 when the power of this unit is turned on. Choices: Off, -80 dB to +16.5 dB Control step: 0.5 dB Zone2 Volume Zone2 Max Vol. Zone2 Initial Vol. Off ■ Audio Select (Default Audio input jack select) Use this feature to designate the default Audio input jack select setting when you turn on the power of this unit. Choices: Auto, Last Zone3 Set Sur.Initialize Audio Select Auto Decoder Mode Last Memory Guard Note The "Zone2 Max Vol." or "Zone3 Max Vol." setting takes priority over the "Zone2 Initial Vol." or "Zone3 Initial Vol." setting. ■ Sur.Initialize (Surround initialize) Use this feature to initialize the parameters for each sound field program within sound field program groups. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings. Adjusted sound field parameter settings are displayed in blue. Choices: CLASSICAL, LIVE/CLUB, ENTERTAINMENT, MOVIE, STEREO, SUR. DECODE, All • Select "Auto" if you want this unit to automatically detect the type of input signals and select the appropriate Audio input jack select setting. • Select "Last" if you want this unit to automatically select the last selected Audio input jack select setting used for the connected input source. ■ Decoder Mode (Default decoder mode) You can select the decoder used by this unit. Choices: Auto, Last Sur. Initialize Audio Select Decoder Mode Auto Memory Guard Last HDMI Set Zone2 Set Zone3 Set Sur.Initialize Audio Select Decoder Mode CLASSICAL LIVE/CLUB ENTERTAINMENT MOVIE STEREO SUR. DECODE All • Press k / n / l / h to select the sound field program you want to initialize and then press ENTER. • Select "All" to initialize settings for all sound field program parameters. Note Sound field program groups cannot be initialized when "Memory Guard" is set to "On" (see page 114). • Select "Auto" if you want this unit to automatically detect input signal types and select the appropriate decoder. • Select "Last" if you want this unit to automatically select the last decoder used for the connected source. ■ Memory Guard (Memory Guard) Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: Off, On Audio Select Decoder Mode Memory Guard Off HDMI Set On Select "On" to protect: • DSP program parameters • All menu items except "Memory Guard" and "System Memory" - "Load". • The start and reload of the "Auto Setup" procedure. 114 En