Yamaha RX V2700 MCXSP10 Manual - Page 133

■ Clearing a macro function You can clear the function programmed for a certain macro button. 1 Set the operation mode selector to AMP or SOURCE and then press MACRO using a ballpoint pen or similar object. "MCR ?" appears in the display window on the remote control. AMP SOURCE TV or AMP SOURCE TV MACRO Note If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1. 2 Press and hold CLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds. "C;OK" appears in the display window on the remote control if clearing was successful. V-AUX/DOCK CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR 2 DVD OFF ON MACRO LEARN CLEAR RENAME (U.S.A. model) y • If you continuously want to clear another function, repeat step 2. • Once you clear a programmed function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes). 3 Press MACRO again to exit the macro programming mode. Notes • "C;NG" appears in the display window on the remote control if clearing was unsuccessful. In this case, start over from step 2. • "ERROR" appears in the display window on the remote control if you press more than one button simultaneously. REMOTE CONTROL FEATURES 129 En ADVANCED OPERATION