Yamaha RX V2700 MCXSP10 Manual - Page 43

PREPARATION 2 Press k / n repeatedly and then h to select "Auto Setup". PRESET/CH PRESET/CH ENTER A/B/C/D/E ENTER A/B/C/D/E 3 Press k to select "Information". Information Setup Menu Start Wiring Distance Size 4 Press h and then n repeatedly to select the desired check items. PRESET/CH PRESET/CH ENTER A/B/C/D/E ENTER A/B/C/D/E Wiring Distance Size Left Right Front NRM NRM Center NRM Sur. NRM NRM S.Back NRM NRM PRNS NRM NRM SubWfr NRM Reload:ENTER AUTO SETUP Wiring (Speaker wiring) Displays the polarity of each connected speaker. • "NRM" appears when the polarity of the connected speaker is normal. • "REV" appears when the polarity of the connected speaker is reversed. Note "---" appears when no speaker is connected to the corresponding speaker channel. Distance (Speaker distance) Displays the speaker distance from the listening position. Press l / h to switch the unit to display the value of the each speaker distance. Note "---" appears when no speaker is connected to the corresponding speaker channel. Size (Speaker size) Displays the size of the connected speakers. The bass cross over frequency ("Cross") appears at the bottom of the menu area. • "LRG" appears when the connected speaker has the ability to reproduce the low-frequency signals effectively. • "SML" appears when the connected speaker does not have the ability to reproduce the low-frequency signals effectively. Note "---" appears when no speaker is connected to the corresponding speaker channel. Equalizing (Speaker equalizing) Displays the result of the adjustment of the frequency responses of each connected speaker. Note Gray line appears when no speaker is connected to the corresponding speaker channel. Level (speaker level) Displays the speaker output level of the connected speakers. Note Gray line appears when no speaker is connected to the corresponding speaker channel. 39 En