Yamaha RX V2700 MCXSP10 Manual - Page 57

BASIC OPERATION USING AUDIO FEATURES Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. Note This operation will override the level adjustments made in "Auto Setup" (see page 35) and "Speaker Level" (see page 109). 1 Set the operation mode selector to AMP and then press LEVEL on the remote control repeatedly to select the speaker you want to adjust. AMP SOURCE TV LEVEL TITLE BAND Enjoying multi-channel sources in 2-channel stereo You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo. Set the operation mode to AMP and then press STEREO on the remote control repeatedly to select "2ch Stereo". AMP SOURCE TV STEREO 5 2ch Stereo Display Adjusted speaker FRONT L Front left speaker CENTER Center speaker FRONT R Front right speaker SUR. R Surround right speaker SB L Surround back right speaker SB R Surround back left speaker SUR. L Surround left speaker SWFR Subwoofer PRNS L Presence left speaker PRNS R Presence right speaker y • Once you press LEVEL on the remote control, you can also select the speaker by pressing k / n. • Instead of "SB R" and "SB L", "SB" is displayed if "Surround Back" is set to either "Small x1" or "Large x1" (see page 106). y • You can use a subwoofer with this program when "Bass Out" is set to "SWFR" or "Both" (see page 107). • You can also select the "2ch Stereo" mode by rotating the PROGRAM selector on the front panel. • You can also select the "2ch Stereo" mode and adjust the parameter by using GUI screen. See page 88 for details. 2 Press l / h on the remote control to adjust the speaker output level. • Press h to increase the value. • Press l to decrease the value. Control range: -10 dB to +10 dB PRESET/CH ENTER A/B/C/D/E 53 En