Yamaha RX-V567 Owners Manual - Page 47

■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: - an playback device is connected with an HDMI cable but cannot transmit audio through HDMI - an playback device with component video output and analog audio output (such as certain game consoles) are connected to the system Inputs that change the audio source HDMI1 OPTION Audio In;;;;;;AV1 Assignable audio input jacks To change assignments, select an input source (HDMI1-4 or AV1-2) as the video input first, and then select audio input jacks in this menu. Set as follows according on the desired combination of audio input jacks. Audio inputs Settings method Optical digital audio input Select AV1 or AV4. Connect the external component audio cable to the optical digital jack for the selected input. Coaxial digital audio Select AV2 or AV3. Connect the external component input audio cable to the coaxial digital jack for the selected input. Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2. Connect the external component audio cable to the audio jack for the selected input. SETUP Configuring the settings specific for each input source (Option menu) • For details of settings, refer to "Receiving video signals from the HDMI jack and audio signals from a jack other than HDMI" (☞p. 18) and "Component connections to analog audio output devices" (☞p. 19). • To return audio inputs to their previous settings, display this item again, and select the original input jack. ■ Displaying information on audio/video signals Audio information Format Channel Format of audio signals. The number of input signal channels (front/surround/ LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/0.1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5.1ch" may be displayed. Signal Info Input source: HDMI1-4, AV1-4 J1 Displays information on digital audio and video signals on the TV screen. Menu item HDMI1 OPTION AUDIO Format Channel Sampling Bitrate VIDEO In Out Dolby D 3/2/0.1 48kHz 384kbps HDMI 1080p HDMI 1080p Information Sampling Bitrate The sampling frequency of analog-to-digital conversion. The bit rate of input signal per second. Video information In Out Message (appears only when an error has occurred) Format and resolution of video input signal. Format and resolution of video output signal. Error messages about HDMI signals and components. Error message HDCP Error HDCP authentication failed. Device Over The number of connected HDMI components is over the limit. Out of Res. The connected monitor is not compatible with the video input signal. • "No Signal" is displayed when no signals are being received, and "---" is displayed if this unit cannot recognize the incoming signal. • The bit rate may vary during playback. J 1 : AV5-6 or AUDIO1-2 are also available when the "Audio Return Channel" function is on, and the source is used for the TV audio input (TV Audio In). En 47