Yamaha RX-V567 Owners Manual - Page 76
Bluetooth™, Remote control
UPC - 027108935980
View all Yamaha RX-V567 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Bluetooth™ Remote control APPENDIX Troubleshooting Display Searching... Completed Canceled BT connected Disconnected Not found Cause Remedy The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of pairing. The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of establishing a connection. The pairing is completed. The pairing is canceled. The connection between the Yamaha Bluetooth wireless audio receiver and the Bluetooth component is established. The Bluetooth component is disconnected from the Yamaha Bluetooth wireless audio receiver. The Bluetooth component is not found. During pairing: - pairing must be performed on the Bluetooth component and this unit simultaneously. Check if the Bluetooth component is in pairing mode. During connecting: - check if the Bluetooth component is turned on. - check if the Bluetooth component is within 10 m (32 feet) of the Yamaha Bluetooth wireless audio receiver. See page - - - - - - - Problem The remote control does not work or function properly. Cause Wrong distance or angle. Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit. The batteries are weak. The remote control ID of the remote control and this unit do not match. External components cannot be controlled using the remote control. The remote control code is not correctly set. Even if the remote control code is correctly set, there are some models that do not respond to the remote control. Remedy The remote control will function within a maximum range of 6 m / 20 ft, and no more than 30 degrees off-axis from the front panel. Adjust the lighting angle, or reposition this unit. Replace all batteries. Match the remote control ID of this unit and the remote control. Set the remote control code correctly using "Remote control code search" on the CDROM. Try setting another code for the same manufacturer using "Remote control code search" on the CD-ROM. If this unit does not work when you press Cursor B / C / D / E, do the following. When the key does not work during DVD disc menu operation: press the Input selector again. When the key does not work during Option menu/Setup menu operation: press the key corresponding to the current menu operation again. See page - - 4 66 - - - - En 76