Yamaha RX-V567 Owners Manual - Page 55

Setting HDMI functions, Auto-adjusting Dolby Digital and DTS, dynamic range

Get Yamaha RX-V567 PDF manuals and user guides
UPC - 027108935980
View all Yamaha RX-V567 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

■ Auto-adjusting Dolby Digital and DTS dynamic range Dynamic Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) signal playback. Min/Auto STD Max (Default) (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals. (Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information. Adjusts the dynamic range for optimum volume for regular home use. Produces audio without adjusting the dynamic range. ■ Setting the maximum volume Max Volume Sets a maximum volume level so that the audio is not played too loudly. The default setting of +16.5 dB produces the highest volume. Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume) Default setting +16.5 dB Adjustment increments 5.0 dB ■ Setting the startup volume Init.Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to "Off," the volume is set at the level when the receiver last entered standby mode. J1 Adjustable range Off, Mute, -80 dB to +16.5 dB Default setting Off Adjustment increments 0.5 dB SETUP Setting various functions (Setup menu) Setting HDMI functions ;HDMI Setup . CToVnAturdoilo;;I;n;;;;;;;;;;;AOVn4 AudioReturnChan;Off Resolution;;;*Thrgh [ p [ ]/[ ]:Up/Down [p]/[[]:Select HDMI Setup submenu Control Turns the HDMI Control on or off. TV Audio In J2 Chooses automatically selected audio input in conjunction with TV operation when the HDMI Control is turned on. AudioReturnChan J2 Transmits audio/video output to the TV and audio input from the TV through a single HDMI cable. Standby Through J2 Selects whether HDMI audio/video signals will be continue to be produced when this unit is on standby. Audio Output J2 Selects the audio output device connected to this unit via HDMI jacks. Resolution Sets the resolution of video signals converted from analog to HDMI. Aspect J3 Sets the horizontal-to-vertical ratio (aspect ratio) of video signals converted from analog to HDMI. J 1 : When you set the "Max Volume" at a lower level than "Init.Volume," the "Max Volume" setting has priority. J 2 : This menu item appears depending on the "Control" setting. J 3 : This menu item appears depending on the "Resolution" setting. En 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
En
55
SETUP
Setting various functions (Setup menu)
■
Auto-adjusting Dolby Digital and DTS
dynamic range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
■
Setting the maximum volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
■
Setting the startup volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode.
J
1
Setting HDMI functions
HDMI Setup submenu
Dynamic Range
Min/Auto
(Min) Sets the dynamic range suitable for low volume
or a quiet environment, such as at night, for bitstream
signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD
signals based on input signal information.
STD
Adjusts the dynamic range for optimum volume for
regular home use.
Max
(Default)
Produces audio without adjusting the dynamic range.
Max Volume
Adjustable range
-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
Init.Volume
Adjustable range
Off, Mute, -80 dB to +16.5 dB
Default setting
Off
Adjustment
increments
0.5 dB
Control
Turns the HDMI Control on or off.
TV Audio In
J
2
Chooses automatically selected audio input in
conjunction with TV operation when the
HDMI Control is turned on.
AudioReturnChan
J
2
Transmits audio/video output to the TV and
audio input from the TV through a single
HDMI cable.
Standby Through
J
2
Selects whether HDMI audio/video signals will
be continue to be produced when this unit is on
standby.
Audio Output
J
2
Selects the audio output device connected to
this unit via HDMI jacks.
Resolution
Sets the resolution of video signals converted
from analog to HDMI.
Aspect
J
3
Sets the horizontal-to-vertical ratio (aspect
ratio) of video signals converted from analog to
HDMI.
;
HDMI Setup
±±±±TV Audio In
;;;;;
AV4
±±
.
±Control
;;;;;;;;;
On
±±±±[
p
]/[
[
]:Select
±±±±AudioReturnChan
;
Off
±±±±±±±±±±±±±±±±±±±±±
±±±±±±±±±±±±±±±±±±±±±
±±±±Resolution
;;;
*Thrgh
±±±±[±]/[±]:Up/Down
p
[
J
1 :
When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max
Volume” setting has priority.
J
2 :
This menu item appears depending on the “Control” setting.
J
3 :
This menu item appears depending on the “Resolution” setting.