Yamaha RX-V567 Owners Manual - Page 74
HDMI™, Tuner (FM/AM
UPC - 027108935980
View all Yamaha RX-V567 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
HDMI™ Problem Cause Remedy See page The front panel display HDMI indicator is flashing. An error with the HDMI connection has occurred. Try re-inserting the HDMI cable. - Confirm that HDMI video that is not 47 supported by the unit is not being input (HDMI Input → Option menu → "Signal Info"). No picture or sound. The number of components is over Disconnect some of the HDMI components. - the limit. The connected HDMI component Connect an HDMI component that supports - does not support high-bandwidth HDCP. digital copyright protection (HDCP). (When using HDMI The TV audio output is not Connect the TV audio output to this unit, 56 Control function) connected to this unit, or the and then select the connected input source TV sound is not setting to match operations carried in "TV Audio In" (Setup menu → HDMI output from this unit out on TV is not set. Setup → TV Audio In). when operating the remote control of the TV. (When using Audio Return Channel function) The Audio Return Channel Make sure that your TV supports Audio 56 Return Channel. Set the Audio Return Channel function to function is not working. on (Setup menu → HDMI Setup → AudioReturnChan). Tuner (FM/AM) APPENDIX Troubleshooting FM Problem FM stereo reception is noisy. There is distortion, and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned into with the automatic tuning method. "No Presets" is displayed. "Wrong Station" is displayed. Cause You are too far from the station transmitter, or the input from the antenna is weak. There is multi-path interference. You are in an area far from a station, or input from the antenna is weak. No preset stations are registered. An invalid FM/AM frequency has been input. Remedy Check the antenna connections. Switch to monaural mode. Replace the outdoor antenna with a more sensitive multi-element antenna. Adjust the antenna height or orientation, or place it in a different location. Replace the outdoor antenna with a more sensitive multi element antenna. Use TUNING H / I to manually select the station. Register stations you want to listen to as preset stations before operation. Input a frequency that can be received. See page 23 36 - - - 35 36 - En 74