Yamaha RX-V567 Owners Manual - Page 56
Receiver operation via TV HDMI Control, cable Audio Return Channel
UPC - 027108935980
View all Yamaha RX-V567 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
■ Receiver operation via TV (HDMI Control) Control Set the HDMI Control function to "On" to operate devices connected via HDMI. If the TV or other external components support HDMI Control (ex. Panasonic VIERA Link), you can use the remote controls of those devices to operate some of this unit's functions, and to synchronize this unit with the operation of those devices. Please refer to "Switching the input source on this unit automatically when listening to TV audio" (☞p. 69) for instructions. Off (Default) On Sets HDMI Control to "Off." Sets HDMI Control to "On." J1 If this unit is connected to HDMI devices that do not support the HDMI Control function, these functions will not operate. ■ Selecting an input source to assign audio input for the TV TV Audio In Select the input source that matches operations carried out on the TV while the HDMI Control function is on. When using a TV that supports Audio Return Channel function and the function is enabled, the audio input for the TV is assigned to the input source selected here. J2 AV1 to AV6 AUDIO1/AUDIO2 Assigns any of the AV1-6 input source for the audio input from the TV. Assigns AUDIO1 or AUDIO2 input source for the audio input from the TV. Default setting AV4 • "TV Audio In" is only displayed with the HDMI Control function (Control) is set to "On." • Please refer to "Using the HDMI Control function" (☞p. 68) for setting instructions. • For details on inputting the audio signal from the TV, refer to "Listening to TV audio" (☞p. 17). ■ Listening to TV audio via single HDMI cable (Audio Return Channel) AudioReturnChan You can enable or disable the Audio Return Channel function. When using a TV that supports Audio Return Channel function and the function is enabled, the TV's audio output is transmit to this unit via an HDMI cable. The TV audio input to this unit is regarded as the input source selected in "TV Audio In." J2 By means of this function, you do not need to connect the TV's audio output (digital audio output or analog audio output) to the unit. Off (Default) On Sets the Audio Return Channel to "Off." Sets the Audio Return Channel to "On." When the TV audio is input to the unit using Audio Return Channel, "TV" is displayed on the front panel display. TV AV4 VOL. SW L CR SL SR SBL SBR • "AudioReturnChan" is only displayed with the HDMI Control function (Control) is set to "On." • Please refer to "Single HDMI cable input to TV audio with Audio Return Channel function" (☞p. 70) for setting instructions. SETUP Setting various functions (Setup menu) ■ Transmitting HDMI audio/video to the TV during standby mode (Standby Through) Standby Through This function allows audio/video signals to continue to be transmitted to a TV connected to HDMI jacks 1-4 even when this unit is in standby mode. Off (Default) On Sets Standby Through to "Off." Transmits audio/video signals from the selected HDMI input source to the TV. • When HDMI Control is "On," Standby Through function is automatically enabled and "Standby Through" is not displayed. • When the Standby Through function is "On," audio/video signals will continue to be transmitted to the TV from the selected HDMI input source when this unit is in standby mode. You can change the HDMI input source to transmit signals during the standby through mode by using dHDMI1-4 on the remote control. When the input source is changed, the HDMI Through/iPod Charge indicator on the front panel blinks twice. • When the Standby Through function is on, the HDMI Through/ iPod Charge indicator on the front panel lights during the standby mode. When this indicator is lit, this unit consumes 1 to 3 W of power. J 1 : When the HDMI Control is "On," the Standby Through function is automatically enabled. When this unit enters standby mode, the audio and video signals from the last-selected HDMI input source will continue to be transmitted to the TV. J 2 : While the Audio Return Channel function is on, the jack selected for the input source cannot be used. En 56