Yamaha RX-V683 RX-V683 Owner s Manual - Page 104
Setup menu items, CINEMA DSP 3D Mode
View all Yamaha RX-V683 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Setup menu items Menu Speaker Sound Video HDMI Item Auto Setup Power Amp Assign Configuration Manual Setup Distance Level Parametric EQ Test Tone Delay Enable Lipsync Auto/Manual Select Adjustment Dynamic Range Max Volume Initial Volume Adaptive DSP Level CINEMA DSP 3D Mode Virtual Surround Back Speaker Object Decode Mode Video Mode HDMI Control Audio Output Standby Through Front Center Surround Surround Back Front Presence Subwoofer Layout Function Automatically optimizes the speaker settings (YPAO). Selects a speaker system. Selects the size of the front speakers. Selects whether or not a center speaker is connected and its size. Selects whether or not surround speakers are connected and their size. Selects whether or not surround back speakers are connected and their size. Selects whether or not presence speakers are connected and their size. Selects whether or not a subwoofer is connected and its phase. Selects the layouts of the surround speakers and front presence speakers. Sets the distance between each speaker and listening position. Adjusts the volume of each speaker. Adjusts the tone with an equalizer. Enables/disables the test tone output. Enables/disables the Lipsync adjustment for each input source. Selects the method to adjust the delay between video and audio output. Adjusts the delay between video and audio output manually. Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Sets the limit value of the volumes. Sets the initial volume for when this receiver is turned on. Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. Enables/disables CINEMA DSP 3D. Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents. Enables/disables the video signal processing (resolution and aspect ratio). Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). Selects a device to output audio. Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. Page 40 107 107 107 108 108 108 108 108 109 109 109 110 110 110 111 111 111 111 111 111 111 112 112 113 114 114 En 104