Yamaha RX-V683 RX-V683 Owner s Manual - Page 29

⬛ Audio jacks To input/output only audio signals, use the following jacks. OPTICAL jacks Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable. Digital optical cable OPTICAL COAXIAL jacks Transmit digital audio signals. Use a digital coaxial cable. Digital coaxial cable COAXIAL AUDIO jacks (Stereo L/R jacks) Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable). Stereo pin cable (Stereo mini jack) Transmits analog stereo audio signals. Use a stereo mini-plug cable. Stereo mini-plug cable AUDIO Connecting a TV Connect the TV to the unit with an HDMI cable and a digital optical cable. The unit (rear) HDMI OUT jack TRIGGER OUT 12V 0.1A IN OUT REMOTE AUDIO 1 (2 TV) OPTICAL AUDIO 2 HDMI OUT (HDCP2.2) ARC HDMI OUT (HDCP2.2) 1HDMI (HDCP2. 1 (1 BD/DVD) 2 ARC ANTENNA (4 RADIO) FM AM HDMI OPTICAL AUDIO 3 AV 1 AUDIO 1 COAXIAL COMPONENT VIDEO (2 TV) AV 2 VIDEO O AUDIO 1 jack COAOXIAPL TICY AL PHONO PB PR AUDIO 4 AUDIO 5 ZONE OUT ZONE 2 GND O HDMI input HDMI HDMI OPTICAL TV Audio output (digital optical) X • You do not make a digital optical cable connection between the TV and the unit in the following cases: - If your TV supports Audio Return Channel (ARC) - If you will receive TV broadcasts only from the set-top box • If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit's power and volume with the TV's remote control. To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see "Information on HDMI" (p.145). About Audio Return Channel (ARC) • ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. • When using ARC, connect a TV with an HDMI cable that supports ARC. En 29