Yamaha RX-V683 RX-V683 Owner s Manual - Page 127
Switching the video signal type (TV FORMAT), Removing the limitation on HDMI video output (MON.CHK)
View all Yamaha RX-V683 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Switching the video signal type (TV FORMAT) LINK MASTER OUT 2 ECO TV STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi-Res ENHANCER YPAO VOL. A- DRC FORMAT•NTSC VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Switch the video signal type of the unit so that it matches to the format of your TV. Settings NTSC, PAL Default U.S.A., Canada, Korea, Taiwan, Brazil and General models: NTSC Other models: PAL Removing the limitation on HDMI video output (MON.CHK) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC ECO MON.CHK••••YES VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack. Disable the monitor check function if you want to specify a resolution in "Resolution" (p.112) when the unit cannot detect the TV's resolution or when you want to specify a different resolution than the detected resolution. Settings YES Enables the monitor check function. (Outputs video signals with a resolution supported by the TV only.) SKIP Disables the monitor check function. (Outputs video signals with a specified resolution regardless of compatibility with the TV.) Y Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV after "MON.CHK" has been set to "SKIP". Selecting the HDMI 4K signal format (4K MODE) LINK MASTER OUT 2 ECO 4K STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi-Res ENHANCER YPAO VOL. A- DRC MODE•MODE 1 VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit. Settings MODE 1 MODE 2 Inputs/outputs 4K signals shown in the table below. (4:2:0 format only for VIDEO AUX [HDMI IN] jack) Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select "MODE 2". Inputs/outputs 4K signals shown in the table below. Y When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet. Format 4K/60, 50 Hz 4K/30, 25, 24 Hz RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 MODE 1 8 bit 10 bit 12 bit ✔ - ✔ - ✔ ✔ ✔ ✔ ✔ MODE 2 8 bit 10 bit 12 bit - - - ✔ - ✔ - ✔ - ✔ En 127