Yamaha V665 Owners Manual - Page 27

INTRODUCTION PREPARATION BASIC OPERATION Playback 2 Press hInput selection keys on the remote control for the input source whose remote control code was registered in step 1 for about 3 seconds while pressing down lSCENE key whose assignment you want to change. The external component can now be controlled remotely just by selecting a scene. From now on the external component can be remotely controllable just by selecting a scene. Muting audio output temporarily (MUTE) 1 Press rMUTE on the remote control to mute the audio output. The MUTE indicator on the front panel display flashes while audio output is muted. 2 Press rMUTE again to resume audio output. Adjusting high/low frequency sound (tone control) You can adjust the balance of the high frequency range (Treble) and low frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. 1 Press KTONE CONTROL on the front panel repeatedly to select "Treble" or "Bass." The current setting is displayed on the front panel display. Enjoying pure hi-fi sound Use Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct mode is activated, this unit plays back the selected source with the least circuitry. Press NPURE DIRECT (or kPURE DIRECT) to turn the Pure Direct mode on or off. NPURE DIRECT lights up when you set Pure Direct mode on. The front panel display turns off while the Pure Direct mode is on. It turns on temporarily when you control this unit (such as volume control). The front panel display turns on again once you set the Pure Direct mode to off. The following features are disabled in Pure Direct mode. - sound field program, tone control - display and operation of the option menu and setup menu - mulit-zone function Using your headphones Plug your headphones in the BPHONES jack on the front panel. When you select a sound field program while using the headphones, the mode is automatically set to SILENT CINEMA mode. Notes • When you connect headphones, no signals are output at the speaker terminals. • When multi-channel signals are processed, sounds in all channels are divided to left and right channels. When the input source is set to "MULTI CH," only front L/R sound is output from the headphones. Treble 0.0dB 2 Adjust the frequency range using LPROGRAM l / h. Control range: -10.0 dB to +10.0 dB The display returns the previous screen soon after you release the key. Notes • The tone control settings are not effective during playback in Pure Direct mode. • If you set the balance extremely off, sounds may not match those from other channels well. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 23 En