Yamaha V665 Owners Manual - Page 62
Controlling Zone2
UPC - 027108933061
View all Yamaha V665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Using multi-zone configuration Controlling Zone2 You can select and control Zone2 by using the control keys on the front panel or on the remote control. The available operations are as follows: • Selecting the input source (AV5-6, AUDIO1-2, V-AUX) of Zone2. • Adjusting the volume of Zone2 (when a Zone2 speaker is connected to the EXTRA SP jack). • Tuning into FM or AM when "TUNER" is selected as the input source of Zone2 (see page 29). • Tuning into XM Satellite Radio when "XM" is selected as the input source of Zone2 (see page 31) (U.S.A. model only). • Tuning into SIRIUS Satellite Radio when "SIRIUS" is selected as the input source of Zone2 (see page 35) (U.S.A. model only). • Playing back music stored on your iPod stationed in a Yamaha iPod universal dock (such as YDS-10 sold separately) connected to the DOCK terminal. Note • You must complete each step while the ZONE2 indicator is flashing on the front panel display. Otherwise, the Zone2 mode is automatically canceled and this unit returns to the normal operation mode. In this case, repeat the Zone2 selection procedure. Controlling Zone2 with the front panel ■ Turning on Zone2 Press CZONE2 ON/OFF to turn on Zone2. ■ Activating the Zone2 operation mode Press DZONE2 CONTROL to control Zone2. The ZONE2 indicator flashes on the front panel display for approximately 10 seconds. • Select "SIRIUS" as the input source to use the SIRIUS Satellite Radio features in Zone2. For details about the SIRIUS Satellite Radio operations, see "SIRIUS Satellite Radio tuning" on page 35. • Select "DOCK" as the input source to use iPod features in Zone2. For details about the iPod operations, see "Using iPod" on page 40. • Select "DOCK" as the input source to use Bluetooth component features in Zone2. For details about the Bluetooth component operations, see "Using Bluetooth components" on page 42. ■ Set Zone2 to the standby mode Press CZONE2 ON/OFF to set Zone2 to the standby mode. Controlling Zone2 with the remote control ■ Turning on Zone2 Switches bMAIN/ZONE2 to ZONE2 position, and press gPOWER. ■ Operating Zone2 Switches bMAIN/ZONE2 to ZONE2 position, and press one of the input selection keys to select the desired input source of Zone2. Note • rMUTE and pVOLUME +/- are available to control Zone2 with same procedure as mentioned above. ■ Setting Zone2 to the standby mode Switches bMAIN/ZONE2 to ZONE2 position, and press gPOWER and to set ZONE2 to the standby mode. ZONE Flashes 2 ■ Operating Zone2 Press OINPUT l / h to select the desired input source while the ZONE2 indicator is flashing on the front panel display. • When AV5-6, AUDIO1-2 or V-AUX is selected, you can listening to the input source in Zone2. • Select "TUNER" as the input source to use the TUNER features in Zone2. For details about the TUNER operations, see "FM/AM tuning" on page 29. • Select "XM" as the input source to use the XM Satellite Radio features in Zone2. For details about the XM Satellite Radio operations, see "XM Satellite Radio tuning" on page 31. 58 En