Yamaha V665 Owners Manual - Page 58

Operating various settings for this unit (Setup menu) ■ 2 Lipsync Adjusts delay between video output and audio output. HDMI Auto Choices: Off*/On Automatically adjusts output timing of audio and video signals when a monitor that supports an automatic lipsync function is connected to this unit. Off Select this when the connected monitor does not support the automatic lip-sync function or you do not use the automatic lip-sync function. Set the correction time in "Manual Delay." On Select this when the connected monitor supports the automatic lip-sync function. Fine adjust the correction time in "Auto Delay." Auto Delay Adjustable range: 0* to 240ms (1 ms step) Fine adjust the correction time when "HDMI Auto" is set to "On." The actual correction time is displayed under in "Auto Delay" field and an offset time set by the user in "Offset" field. Manual Delay Adjustable range: 0* to 240ms (1 ms step) Manually fine adjusts the correction time. Select this when the connected monitor does not support the automatic lipsync function or you set "HDMI Auto" to "Off." Function Setup You can set various items for HDMI and display. 1 HDMI You can set items for HDMI. ■ Standby Through Choices: On/Off* Selects on or off of output of HDMI signals input from the HDMI IN jack to the HDMI OUT jack when this unit is on standby. When this parameter is set to "On" signals input from the HDMI 1-4 jacks can be output to a monitor component. On Outputs the HDMI signals to the HDMI OUT jack. Off Not output the HDMI signals to the HDMI OUT jack. y • To enables pass-through output, any one of the input sources connected to the HDMI1-4 must be selected before switching to standby. • When Standby Through turns on, the HDMI THROUGH indicator on the front panel display lights up. While the indicator lights up, this unit consumes up to 3W of power even on standby. ■ Audio Output Choices: Amp*/TV/Amp+TV Selects this unit or a component connected to this unit via the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI IN jack. Amp TV Amp+TV Outputs HDMI sound signals form the speakers connected to this unit. Outputs HDMI sound signals from the speakers of a TV connected to this unit. Sound output from the speakers connected to this unit is muted. Outputs HDMI sound signals from the speakers connected to this unit and the speakers of a TV connected to this unit. Note • Signal formats of audio and visual signals output from this unit to the monitor vary depending on specifications of the monitor. ■ Resolution Choices: Through*/480p/720p/1080i/1080p Upscales the resolution of HDMI output that is converted from analog video input signals and output from the HDMI OUT jack. Notes • Resolution of the HDMI output converted from 720p or 1080i analog video signals cannot be upscaled. • When a video monitor is connected to this unit via the HDMI jack, this unit automatically detects a resolution that the monitor supports. An asterisk (*) appears on the left of the detected resolution. • If this unit cannot detect the resolution that the monitor supports, set "MON.CHK" in the advanced setup menu to "SKIP" (see page 60) and try it again. ■ Aspect Choices: Thrgh*/16:9/Smart Set a horizontal to vertical ratio (aspect ratio) of images reproduced by HDMI signals output from the HDMI OUT jack when the HDMI signals are converted from analog video input signals by a video conversion function. Thrgh 16:9 Smart Outputs the video signals without changing the aspect ratio. Outputs the video signals that displays 4:3 images on a 16:9 monitor with black bands on the right and left sides of the monitor screen. Outputs the video signals that displays 4:3 images on a 16:9 monitor by stretching right and left of images to fit on the monitor screen. Notes • You cannot change the aspect ratio of the screen when "Resolution" is set to "Thrgh." • The setting is not effective for inputs with the aspect ratio other than 4:3. • You cannot obtain an effect of the aspect ratio when visual signals are input from the HDMI IN jack or 720p, 1080i or 1080p signals are input. 54 En