Yamaha V665 Owners Manual - Page 48

Setting the option menu for each input source (OPTION menu) ■ Decoder Mode Input source: HDMI1-4, AV1-4 Choices: Auto*/DTS Selects DTS digital audio signals for reproduction. Auto DTS Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced. ■ Extended Surround Input source: HDMI1-4, AV1-4 Choices: Auto*/PLIIxMovie/PLIIxMusic/EX/ES/ Off Selects whether to reproduce multi-channel input signals in 6.1- or 7.1-channel when surround back speakers are used. Auto PLIIx Movie PLIIx Music EX/ES Off Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present, and reproduces the signals in 6.1- or 7.1channel. Always reproduces signals in 6.1- or 7.1channel using the PLIIxMovie decoder whether or not surround back channel signals are contained. You can select this parameter when one or two speakers are connected. Always reproduces signals in 6.1- or 7.1channel using the PLIIxMusic decoder whether or not surround back channel signals are contained. You can select this parameter when one or two speakers are connected. Automatically selects the most suitable decoder for input signals whether or not the flag for reproducing surround back channel is present, and always reproduces signals in 6.1channel. Always reproduces signals in 5.1-channel whether or not the flag for reproducing surround back channel is present. ■ Signal Info Input source: HDMI1-4, AV1-4 Displays information on audio and video signals on the video monitor and front panel display. You can change items to be displayed using oCursor k / n. Signal Info parameters ■ Audio information Information Format Description Format of digital audio signals. Channel Sampling Bitrate The number of input signal channels (front/ surround/LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/ 0.1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5.1ch" may be displayed. The sampling frequency per second in analog-to-digital conversion. The bit rate of input signal per second. Notes • "No Signal" is displayed when no signals are input and "---" is displayed when signals that this unit cannot recognize are input. • The bit rate may vary during playback. ■ Video information Information In Out Message Description Format and resolution of video input signal. Format and resolution of video output signal. Error messages about HDMI signals and HDMI components. See the following for details of the error messages. HDMI error message (appears only when an error has occurred) HDCP Error Device Over Out of Res. HDCP authentication failed. The number of HDMI components connected is over the limit. The connected monitor is not compatible with the video input signal. ■ FM Mode Input source: TUNER Choices: Stereo*/Mono Sets FM broadcasting receiving mode. Stereo Receives in stereo mode. Mono Receives in monaural mode. You can get a better reception in MONO mode. 44 En