Yamaha V665 Owners Manual - Page 54

Operating various settings for this unit (Setup menu) You can call the setup menu using the remote control and change the settings of various menus. You can change the following settings in the setup menu. For details, read "Basic operation of the setup menu" first, and see the respective pages. Menu/Submenu Speaker Setup Sets items for speakers. Function Page 51 1 Auto Setup (YPAO) 2 Manual Setup A)Config B)Level Automatically adjusts output characteristics of speakers. 51 Manually adjusts output characteristics of speakers. 51 Sets speaker configurations, such as connection status of speaker and a size of the 51 connected speaker (sound reproduction capacity), suitable for the listening environment. Separately adjusts volume of each speaker. 53 C)Distance D)Equalizer E)Test Tone Sound Setup Adjusts timing at which each speaker outputs sound based on distances between 53 speakers and the listening position. Selects an equalizer that adjusts speaker output characteristics. 53 Generates test tones. 53 Sets various items for sound outputs. 53 1 Dynamic Range Adjusts dynamic ranges of speakers and headphones. 53 2 Lipsync Adjusts delay in output timing between video signals and audio signals. 54 HDMI Auto Auto Delay Manual Delay Sets on or off of automatic adjustments for delay between output timing between 54 video signals input from the HDMI jack and audio signals. Fine adjusts a delay time of HDMI Auto. 54 Manually fine adjusts the delay of audio and visual output. 54 Function Setup Set various items for HDMI and display. 54 1 HDMI Sets various items for input sources. 54 Standby Through Audio Output Resolution Aspect 2 Display Selects on or off of output of HDMI signals input from the HDMI IN jack to the 54 HDMI OUT jack when this unit is on standby. Selects this unit or a component connected to this unit via the HDMI OUT jack of 54 this unit for reproducing sound signals input from the HDMI IN jack. Sets resolution of the HDMI output that is converted from analogy visual input 54 signals. Set an aspect ratio of images reproduced by HDMI signals converted from analog 54 video input signals. Set items for a monitor or the front panel display. 55 Dimmer Sets brightness of the front panel display. 55 FL Scroll OSD Shift 3 Volume Selects the way to display characters on the front panel display. 55 Adjusts top and bottom positions of the screen displayed on the video monitor. 55 Sets items for volumes. 55 Adaptive DRC Max Volume Init. Volume 4 Input Rename 5 Zone2 Adjust the dynamic range (difference between the maximum volume and the 55 minimum volume) in conjunction with the volume level. Sets the maximum volume level so that the volume will not be accidentally 55 increased. Sets the volume at the time this unit is turned on. 55 Changes input source names to be displayed on a video monitor or the front panel 55 display. Sets the maximum volume level and initial volume level of Zone2. 56 Max Volume Init. Volume Sets the maximum volume level so that the volume will not be accidentally 56 increased. Sets the volume at the time this unit is turned on. 56 DSP Parameter Sets parameters for the sound field programs. 56 Memory Guard Protects some settings against accidental alteration. 56 50 En