Zanussi ZCG551GNC Product Manaul - Page 18

Stainless steel or aluminium appliances: Clean the oven door with a wet sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions Catalytic walls - main oven The main oven walls with a catalytic coating are self-cleaning. They absorb fat which collects on walls while the oven operates. To support this self-cleaning process heat the oven without any food regularly: 1. Open the oven door. 2. Remove all accessories from the oven. 3. Close the door. 4. Set the maximum oven temperature and let the oven operate for 1 hour. 5. Clean the oven cavity with a soft and damp sponge. Caution! Do not attempt to clean catalytic surfaces with oven sprays, abrasive cleaners, soap or other cleaning agents. This may damage the catalytic surface. Discolouration of the catalytic surface has no effect on catalytic properties. Cleaning the top oven glass panels The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different. Removing the glass: 1. Open the door. 2. Push the door trim at both sides to release the clips. Refer to the picture. 3. Remove the glass panels. 1 2 1 To replace the glass obey the procedure in opposite sequence. Cleaning the oven door The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different. Removing the glass: 1. Push the door trim at one side to remove it. Refer to the picture. 2. Pull up the trim. 3. Remove the glass panels. A 2 1 18 www.zanussi.com