Zanussi ZCG551GNC Product Manaul - Page 20

Problem The gas ring burns unevenly. The oven does not heat up. The oven does not heat up. The oven does not cook evenly. The oven lamp does not operate. The display shows "12.00" and "LED". Steam and condensation settle on the food and in the oven cavity. The appliance makes noises or popping sounds. The flame colour is orange or yellow. Possible cause Burner crown is blocked with food residue. The oven is not switched on. The necessary settings are not set. The oven lamp is defective. A power cut. You left the dish in the oven for too long. Remedy Make sure that the injector is not blocked and the burner crown is clear of food particles or cleaning fluids. Dry them with a cloth and clean stubborn marks away with a dry nylon brush (for example an old toothbrush). Switch on the oven. Control the settings. Check that the appliance is correctly installed and levelled, and that you use the recommended temperatures and shelf positions. Replace the oven lamp. Reset the clock. Do not leave the dishes in the oven for longer than 15-20 minutes after the cooking process ends. When the gas is drawn through the burner, it can compress as they heat up. Some metal parts of the appliance expand and contract when they heat up or cool down. The noises are normal. The flame can look orange or yellow (flame disturbance) in some areas of the burner because of how the burner is made. This is normal. If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ... 20 www.zanussi.com