1995 Chevrolet Corvette Owner's Manual - Page 142
1995 Chevrolet Corvette Manual
Page 142 highlights
2. NOTICE: To help avoiddamaging the hardtop when not in use: Store the hardtop in its normal position, resting on its mounting brackets. 0 Store hardware and trim panel with the hardtop. 12. Connect the rear window defogger electrical connectors. Disconnect both rear window defogger electrical connectors behind the lock pillar. 3. Lower the convertible top. Refer to "Convertible Top" in the Index. This procedure will require the use the storage of compartment lid release button behind the dnver's seat or the center console release switch. fuse that The enables these releases is not installed at the assembly plant and shouldbe in your center console.See "Instrument Panel Fuse Block" in the Index for location of the fuse. The fuse is labeledHATCH (45). To Install Your Convertible Hardtop 1. Park on a level surface, set the parking brake firmly and shift an automatic transmission into PARK (P). Shift a manual transmission into REVERSE (R). Lower both windows and sunshades. Turn off the radio to lower the power antenna and turn the ignition key to LOCK. 4. With one person on each side, carefully position the hardtop over the vehicle. Lower the hardtopslowly, aligning the rear bolt spacers onto the bezels, and front conicalnuts into thetapered receivers. Realign the hardtop, if necessary. NOTICE: To help avoiddamage, don't force the rear of the hardtop down. The hardtop may rest slightly above the storage compartment lid until the release lever is pulled. See Step 8 in this procedure. 2-99