1995 Chevrolet Corvette Owner's Manual - Page 268

your brake fluid. Adding brake fluid won't correct a leak. If you addfluid when your linings are worn, then you'll have too muchfluid when you get new brake linings. You should add (or remove) brake fluid, as necessary, only when work done on the brake is hydraulic system. On vehicles equipped with the LT5 (Code J) engine, the brake warning light will come on when your brake fluid falls to a low level. See "Brake System Warning Light" in the Index. For vehicles equipped with the LT1 (Code P) engine, refer to the Maintenance Schedule to determine when to check your brake fluid. See "Periodic Maintenance Inspections" in theIndex. To Check Brake Fluid You can check the brake fluid without taking off the cap. Just look at the brake fluid reservoir. The fluid level should be above the MIN mark on the reservoir. If it isn't, have your brake system checked to see if there is a leak. After work is done onthe brake hydraulic system, make sure the level is between the MIN and MAX marks. 6-33