2004 Mazda RX-8 Owner's Manual - Page 208

J60E_8R65-EA-03C_Edition2.book Page 9 Saturday, April 26, 2003 1:48 PM In Case of an Emergency Flat Tire 10. Hold the bottom of the bottle upright, squeeze the bottle with your hands, and inject the entire amount of tire sealant into the tire. NOTE Do not throw away the empty tire sealant bottle as the sealant in the bottle can be replenished when replacing the tire. Take the bottle to an Authorized Mazda Dealer. 13. Attach the vehicle speed restriction sticker in a place where the driver can easily see it. Speed restriction sticker Valve NOTE The tire sealant cannot be reused. Purchase new tire sealant at an Authorized Mazda Dealer. 11. Pull out the injection hose from the valve. Reinsert the valve core into the valve and turn it clockwise to install it. 12. Attach the sticker that indicates completion of the tire repair on a flat outer surface of the repaired tire. WARNING Attaching Sticker to the Steering Wheel Pad: Attaching the vehicle speed restriction sticker to the steering wheel pad is dangerous. The sticker could interfere with air bag inflation and cause serious injury. Also, do not attach the sticker to the meter panel, as it would obstruct vision of areas such as warning light indicators or the speedometer. Repaired tire sticker 7-9 Form No. 8R65-EA-03C